If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

$2989.00 – HDX2 Bundle Kit – Two HD Cameras with OBDII Interface (special introductory offer)

$2395.00 – HDX2 Basic Kit – Single HD Camera

Race-Keeper HDX2 combines the power of video from multiple 1080p HD cameras with automatically synchronized data in one easy-to-use system.

Race-Keeper HDX2 intro kit

Three years in development, Race-Keeper HDX2 combines the power of true 1080p high-definition multi-camera video with automatically synchronized data in one easy to use system.

Race-Keeper HDX2’s video is comprised of two full resolution, 1080p, video streams for unmatched video capability and performance. Race-Keeper HDX2’s logger combines a high performance GPS, accelerometer and gyro with vehicle inputs to provide a full spectrum of data for comprehensive analysis.

As with all Race-Keeper systems, video and data are always automatically synchronized for fast and easy review using Race-Keeper Comparo analysis software.

Say Goodbye to Jello

Video from most on board HD cameras have distortion cause by vibration, often referred to as a ‘jello effect’. Race-Keeper HDX2’s 1080p cameras have an on board image stabilization algorithm which reduces the distortion to give a rock solid, crystal clear, distortion free image.

Fully Automated

Like all Race-Keeper systems, HDX2 is fully automated. Unlike other HD systems, HDX2 gives you the power to never fiddle again with separate HD cameras, batteries and SD cards or starting and stopping individual cameras. Race-Keeper HDX2 is fully automated and can be programmed to automatically power up when the car is started, start recording when you leave pit lane and stop when you shut the car off.

Fast and Easy

Race-Keeper HDX2’s video and data record to a single removable SD Card, USB or USB3 thumb drive for fast and easy review. And like all Race-Keeper systems, the video and data are always automatically synchronized. Using Race-Keeper Comparo, side-by-side analysis software, simply load the file, open the file and you’re done.

Dual Stream

Race-Keeper HDX2 features Race-Keeper’s unique Dual Stream technology. Each of Race-Keeper HDX2’s two, 1080p, HD cameras record a full size, 1080p, video stream. Each of the two streams play back together in Race-Keeper Comparo for an uncompromised view of the track, the driver or anywhere else you may want to point a camera.

• 1080p/30 fps or 720p at 60fps for brilliant, broadcast quality video
  • True Dual Stream HD video for comprehensive video coverage (track, cockpit, rear)
  • Image Stabilization or Global Shutter cameras for rock solid image quality
  • MPEG-4 video file plays in all popular media players
  • 20 Hz GPS for accurate lap times, splits and track mapping
  • 3-axis internal accel for lateral, inline and vertical G data
  • Internal gyro for roll, pitch and yaw data
  • 3 USB ports for easy connection to additional inputs/outputs
  • 1 GB Ethernet port for high speed network connection
  • 2 CAN ports for logging vehicle CAN data and for other CAN devices
  • Records to removable SD, USB or USB3 for fast and easy off-loading
  • Small, lightweight, rugged, waterproof construction for harsh environments
  • Sealed, locking connectors to ensure reliable operation
  • Waterproof Bullet Cameras with ¼-20 mounting lugs for easy internal or external mounting
  • HDMI and composite video output for live display, playback and easy camera setup
  • Programmable power-on, start/stop recording for truly hands off operation

Race-Keeper HDX2 video data logger combines two full resolution (1080p or 720p) with high performance GPS, accelerometer, gyro and optional vehicle inputs to provide unmatched video capability and a full spectrum of data for comprehensive analysis. As with all Race-Keeper systems, video and data are always automatically synchronized for fast and easy review using Race-Keeper Comparo analysis software.

Technical Specifications
• Video
– Two 1080p/720p Camera Inputs
– Dual Stream 1080p/30fps or 720/60fps
• Audio
– Microphone Inputs with Auto Gain Control
• Video Output
– HDMI
– NTSC Composite
• Comms
– 3 USB Ports
– 2 CAN Ports
– 1 GB Ethernet Port
• Data
– 3 Axis Accelerometer
– 20 Hz GPS Engine
– Internal Gyro
• Recording Media
– SD, USB 2.0, USB 3.0
• Power
– 12v Source
– Internal Battery Backup
• Enclosure
– Hi-Impact ABS Plastic
– 7.5” W x 5” D x 1.5” H
– Weight: 1 lb.
– Waterproof: IP67
– Locking Hirose Connectors
– Locking HD Video Connectors
• Bullet Cameras
– HD 1080p (1920×1080)
– Rolling Shutter
– On-Board Image Stabilization
– Vibration Canceling Cherrie moraga biography.

• Products

  • DVB-T/T2, DVB-S/S2 and DVB-C receivers with ASI and/or IP output, Common Interface and TS analyzer.

  • Remultiplexers with IP and/or ASI inputs and outputs for DVB and IP TV headneds, embedded SI/PSI generators, producing Single Program Transport Stream (SPTS) and/or Multi Program Transport Stream (MPTS), PCR corrector (+-500 ns).

  • MPEG-2/h.264 Encoders/decoders with component, composit, HDMI, HD-SDI in/out, IP&ASI in/out.

  • The TOTALCRYPT system developed by CableWorld solves the descrambling function at the receiving side by using the standard Common Interface.

  • From ASI to IP and from IP to ASI, transparent transmitting.

  • Active distributing of SAT IF signals ,distributing of ASI signals, Switching/Timeing of ASI signals.

  • Active combining of TV modulators’, FM modulators’ and DVB-C modulators’ signals, 8 MHz channel filters.

  • Analyzers with IP and/or ASI inputs, portable TS analyzer for analyzing DVB-C, DVB-T and ASI signals.

  • Transport stream generator and inserter, OEM products, power supply.

• Services
• Downloads
• About us

• Products
• Services
• Downloads
• About us

Firmware

Firmware upgrade for Multistandard Decoders

CW-4671 CW-4672 CW-4673 CW-4674

Version: 1.04

Firmware upgrade for DVB-S/S2 Satellite Receivers

CW-4611 CW-4612 CW-4621 CW-4622

What is new: SPTS

Version: 1.05

Firmware upgrade for DVB-T Terrestrial Receivers

CW-4651 CW-4652 CW-4661 CW-4662

What is new: SPTS

Version: 1.05

Firmware upgrade for Full-duplex ASI-IP-ASI Converters

CW-4492

Firmware upgrade for ASI to IP Converters

CW-4441 CW-4442 CW-4443

Version: 1.03

What is new: PSI analyzer added

Firmware upgrade for IP to ASI Converters

CW-4541 CW-4542 CW-4543

Version: 1.03

What is new: PSI analyzer added

Firmware upgrade for EDGE, Bridge and IP TV Remultiplexers

EDGE Remultiplexer CW-4458, CW-4558

IP TV Remultiplexer CW-4456, CW-4556

Bridge Remultiplexer CW-4450

v1.04: save to file without any Java, NIT table Constellation mode;

Firmware upgrade for devices with separated management and stream ports

It can be used only over 1.08 version devices!

Fixes: Faster TCP communication through firewalls, gateways, and antivirus softwares

Firmware upgrade for DVB-T-T2-C receiver

(CW-4631, CW-4632, CW-4634, CW-4636, CW-4641, CW-4642, CW-4644, CW-4646)

Version: 0.74

Firmware upgrade for devices with separated management and stream ports

It can be used only over 1.08 version devices!

What is new: Single Program Transport Stream (SPTS) sending over IP

Firmware upgrade for DVB-T-T2-C receiver

(CW-4631, CW-4632, CW-4634, CW-4636, CW-4641, CW-4642, CW-4644, CW-4646)

Version: 1.06

It can be used only with Gigabit Ethernet Controller2 v1.11 or higer version.

What is new: Single Program Transport Stream (SPTS) sending over IP.

Firmware upgrade for MPEG-4 Encoder

(only for device which equipped with Gigabit Ethernet Controller 2)

Firmware upgrade for devices with separated management and stream ports

It can be used only over 1.08 version devices!

What is new: in case of reset the default IP address of the management port is 192.168.10.10

WEB GUI firmware for the following DVB-S2 and DVB-S2X Satellite Receivers:

CW-4611.2

CW-4612.2

CW-4614.2

CW-4616.2

CW-4621.2

CW-4622.2

CW-4624.2

CW-4626.2

What is new: web GUI of the DVB-S2 and DVB-S2X Receiver with silicon tuner. The firmware automatically recognises the type (DVB-S2 or DVB-S2X) of the tuner.

Release date: 2018.01.17.

Version: 1.01

Firmware upgrade for EDGE, Bridge and IP TV Remultiplexers

It can be used only for the following devices.

EDGE Remultiplexer CW-4458, CW-4558

IP TV Remultiplexer CW-4456, CW-4556

Bridge Remultiplexer CW-4450

What is new: TS analyzer bug fixed, hard reset settings bug fixed, NIT table fixed (only in case of Remultiplexer board upgraded after 31 January 2017).

Release date: 25 April 2017

Version: 1.07

MIB file contains trap messages for:

- errors of the Gigabit ethernet board

- parameters, and errors of the DVB-T/T2 lite/C tuner

- parameters, and errors of the DVB-S/S2 tuner

Firmware upgrade for Personal Stream Tool GEC2 board

version: 1.24

Only for PST (X25)

What is new:

- minor bug fixes

Firmware upgrade for Personal Stream Tool (PST) Web GUI

Version: 1.12beta

What is new:

- new PSI analyzer in the TS Explorer module

- Manage new character tables in SDT tables

- MER: Modulation Error Rate meter

- Cake chart TS data rate meter

Firmware upgrade for Personal Stream Tool (PST) Web GUI

Version: 2.02

• Address: H-1116 Budapest, Kondorfa utca 6/B
• P.O.B.: H-1519 Budapest, Pf. 418.
  
• Phone: +36 1 371 2595
• Fax: +36 1 204 7839
  
• www.cableworld.hu